TK-3160M
UHF Portable Radio (non-EU use)
Discontinued model
Key Features
| Frequency Range: 450-490 MHz |
| 16 Channels |
| 4 Watt RF Output |
| Built-In Voice Scrambler |
| Internal Options Boards |
| FleetSync Digital Signalling, PTT ID and SelCall |
| QT, DQT and 2-Tone Signalling |
| PC Programming |
PMR General Features
| 2-Tone Signalling | Yes |
| Calling Alert | Yes |
| Compact Design | Yes |
| Companded Audio | Yes |
| Digital ANI Built-in | Yes |
| DTMF Function | Yes |
| Dual-mode Scanning | Yes |
| Ease of Operating Use | Yes |
| Embedded Message | Yes |
| Emergency Call Function | Yes |
| Emergency Key | Yes |
| Enhanced Kenwood Audio | Yes |
| Internal Option Port/Ports | Yes |
| Internal VOX Ready | Yes |
| Operator Selectable Tone | Yes |
| Programmable Function Keys | 3 Programmable Function Keys |
| PTT ID | Yes |
| QT (CTCSS) / DQT (digital) | Yes |
| Remote Stun and Revive | Yes |
| Scan | Yes |
| SelCall Function | Yes |
| Selectable Microphone Gain | Yes |
| "Talk Back" Scanning Function | Yes |
| Time-Out Timer | Yes |
| Voice Inversion Scrambler | Yes |
| VOX | Yes |
| Windows PC Programming and Tuning | Yes |
FleetSync Signalling Features
| Emergency Status | Yes |
| PTT ID Digital ANI | Yes |
| Selective Calling | Yes |
Applicable Standards
| IP54 | Yes |
| IP55 | Yes |
| Measurement - EIA Standards | Yes |
| MIL-STD 810 F | Yes |
Technical Specifications
| Frequency Range - M Type | 450 - 490 MHz |
| Number of Channels | 16 |
| Channel Frequency Spread | 40 MHz |
| Channel Spacing | Wide: 25 kHz
Narrow: 12.5 kHz |
| Antenna Impedance - 50 Ohm | Yes |
| Battery Life | With KNB-35L: 9 hours
With KNB-25A: 8 hours With KNB-26N: 12 hours - 5-5-90 duty cycle with battery saver off - |
| Battery Voltage | 7.5 V DC ± 20% |
| Frequency Stability | ± 2.5 ppm (-30 °C to + 60 °C) |
| Operating Temperature Range | -30 °C to + 60 °C |
| PLL Channel Steps | 5.0 kHz/6.25 kHz |
| Dimensions | Radio only:
56 x 109.30 x 18.40 mm With KNB-35L: 56 x 109.30 x 34.50 mm With KNB-25A: 56 x 109.30 x 40.70 mm With KNB-26N: 56 x 109.30 x 40.70 mm - Projections not included - |
| Weight (net) | Radio only: 165 g
With KNB-35L: 290 g With KNB-25A: 355 g With KNB-26N: 400 g |
Receiver Specifications
| Adjacent Channel Selectivity | 70 dB at 25 kHz
62 dB at 12.5 kHz |
| Audio Output | 500 mW with less than 10% distortion |
| Circuitry - Double Conversion Superheterodyne | Yes |
| Intermodulation | 65 dB at 25 kHz
60 dB at 12.5 kHz |
| Sensitivity - EIA 12 dB SINAD | 0.25 µV at 25 kHz
0.28 µV at 12.5 kHz |
| Spurious Reponse Rejection (Analogue) | 65 dB |
Transmitter Specifications
| RF Power Output (High/Low) | 4 W / 1 W |
| FM Noise (EIA) | 45 dB at 25 kHz
40 dB at 12.5 kHz |
| Microphone Impedance | 2000 Ohm |
| Modulation Distortion | Less than 5% |
| Modulation Limiting | ± 5.0 kHz at 25 kHz
± 2.5 kHz at 12.5 kHz |
| Spurious Response (EIA) | 70 dB |