United Kingdom

TK-8160E

TK-8160E

UHF FM Mobile Radio (EU use)

 

Discontinued model

 

Key Features

Frequency Range: E Type 440-470MHz
E3 Type 400-430 MHz
128 Channels
25 Watt RF Output
Alphanumeric LCD Display
Built-In Voice Scrambler
Lone Worker Emergency Mode
FleetSync, 5-Tone, DTMF, QT and DQT Signalling
Windows PC Programming and Tuning
Requires Optional Microphone

PMR General Features

2-colour LED (Red, Green)Yes
5-Tone Signalling (multi-format)Yes
Adjustable LCD BacklightingYes
Beginning/End of Transmission I.D. SignalYes
Busy Channel Lock-outYes
Calling AlertYes
Character Display (Alphanumeric)Yes
Compact DesignYes
Companded AudioYes
Digital ANI Built-inYes
DTMF FunctionYes
DTMF Number DisplayYes
Ease of Operating UseYes
Emergency Call FunctionYes
Emergency KeyYes
Enhanced Kenwood AudioYes
Front-mounted LoudspeakerYes
GPS CompatibleYes
Horn Alert and Public Address OptionYes
Ignition Sense Input and Cable OptionYes
Illuminated KeysYes
Internal Option Port/PortsYes
Kenwood ESN (Electronic Serial Number)Yes
Key LockYes
Lone Worker FunctionYes
Monitor ButtonYes
Multiple Scanning FunctionYes
Operator Selectable ToneYes
Power-On MessageYes
Pre-programmed Status MessagesYes, Status messages are 2-digit codes, from 10 - 99 (numbers 80 - 99 are reserved for special messages). Each message can be pre-programmed with up to 16 alphanumeric characters.
Programmable Function Keys5 Programmable Function Keys
PTT IDYes
QT (CTCSS) / DQT (digital)Yes
Remote Stun and ReviveYes
ScanYes
SelCall FunctionYes
Selectable Microphone GainYes
Time-Out TimerYes
Transceiver PasswordYes
Voice Inversion ScramblerYes
Voting FunctionYes
Windows PC Programming and TuningYes
Wired Cloning FunctionYes

FleetSync Signalling Features

Caller ID DisplayYes
Emergency StatusYes
PTT ID Digital ANIYes
Remote StunYes
Selective CallingYes
Status MessagingYes

Options

GPS Receiver/Modem Units (External Options)Yes, KGP-2A/2B
Internal Scrambler BoardOptional 3rd-party Module
Mobile Data Terminal Head (External Option)Yes

Accessory Features

Current drainStandby: ≤ 0.4 A
Receive: ≤ 1.0 A
Transmit: ≤ 8.0 A

Applicable Standards

E-Mark (95/54/EC)Yes
RE Directive: EN300 086-2Yes
EN300 113-2Yes
EN300 219-2Yes
EN301 489-5Yes
EU Safety: EN60065Yes
EU Safety: EN60215Yes
EU Safety: EN60950-1Yes
For use in the EUYes
Measurement - EN StandardsYes
MIL-STD 810 FYes

Technical Specifications

Frequency Range - E Type440-470 MHz
Frequency Range - E3 Type400-430 MHz
Number of Channels128
Channel Frequency Spread30 MHz
Channel SpacingWide: 25 kHz
Mid: 20 kHz (only "E Type")
Narrow: 12.5 kHz
Antenna Impedance - 50 OhmYes
Frequency Stability± 2.5 ppm (-30 °C to + 60 °C)
Operating Temperature Range-30 °C to + 60 °C
Operating Voltage13.6 V DC ± 15% Negative Ground
PLL Channel Steps5.0 kHz/6.25 kHz
Dimensions160 x 43 x 107 mm
- Projections not included -
Weight (net)1.0 kg

Receiver Specifications

Adjacent Channel Selectivity70 dB at 25 kHz
70 dB at 20 kHz (only "E Type)
60 dB at 12.5 kHz
Audio Output4 W with less than 5% distortion
Circuitry - Double Conversion SuperheterodyneYes
Intermodulation65 dB
Sensitivity - EIA 12 dB SINAD0.28 µV at 25 kHz
0.28 µV at 20 kHz (only "E Type)
0.35 µV at 12.5 kHz
Sensitivity - EN 20 dB SINAD-3 dBµV at 25 kHz
-3 dBµV at 20 kHz (only "E Type)
-2 dBµV at 12.5 kHz
Spurious Reponse Rejection (Analogue)70 dB

Transmitter Specifications

RF Power Output5 W - 25 W
FM Noise (EIA)45 dB at 25 kHz
40 dB at 12.5 kHz
Microphone Impedance600 Ohm
Modulation DistortionLess than 5%
Modulation Limiting± 5.0 kHz at 25 kHz
± 4.0 kHz at 20 kHz (only "E Type)
± 2.5 kHz at 12.5 kHz
Spurious Emission (EN)-36 dBm ≤ 1 GHz
-30 dBm > 1 GHz