United Kingdom

TK-7360HM
  • TK-7360HM
  • TK-7360HM
  • TK-7360HM
  • TK-7360HM
  • TK-7360HM
  • TK-7360HM

Additional Images

TK-7360HM

VHF Compact Synthesized FM Mobile Transceiver (non-EU use) - High Power

 

Brochures

► TK-7360MH

► TK-7360ME Middle East

 

Key Features

Frequency Range: 136-174 MHz
128 Channels/128 Zones
50 Watts RF Output
Emergency Mode
QT & DQT Signalling plus DTMF PTT ID
Electronic Serial Number
MDC-1200 Signalling
D-Sub 15 pin Interface Connector
Requires Optional Microphone

Supplied With

D.C. CableYes
FuseYes, 15 A
Instruction ManualYes, English & Russian
Mounting BracketYes

PMR General Features

Blue colour LEDYes
3-colour LED (Red, Orange, Green)Yes
2-Tone SignallingYes
5-Tone Signalling formats(requires special license ID)
Busy Channel Lock-outYes
Calling AlertYes
Compact DesignYes
Companded AudioYes
DB-15 Accessory ConnectorYes; can also be programmed as 8 individual Accessory Ports
DTMF FunctionYes
Ease of Operating UseYes
Embedded MessageYes
Emergency Call FunctionYes
Emergency KeyYes
Enhanced Kenwood AudioYes
FleetSyncYes
Front-mounted LoudspeakerYes
GPS CompatibleYes
Horn Alert/PA FunctionYes
Independent Setting per ChannelCompander, Scrambler, Wide/Narrow Deviation & Hi/Lo Power
Kenwood ESN (Electronic Serial Number)Yes
Key LockYes
Lone Worker FunctionYes
LTR TrunkingYes
MDC-1200Yes
Minimum-Volume SettingYes
Monitor ButtonYes
Multiple Scanning FunctionYes
Operator Selectable ToneYes
Programmable Function Keys10 Programmable Function Keys
PTT IDYes
QT (CTCSS) / DQT (digital)Yes
Remote Stun and ReviveYes
RSSI Level IndicatorYes
SelCall FunctionYes
Selectable Microphone GainYes
Switchable Display BacklightingYes
Talk AroundYes
"Talk Back" Scanning FunctionYes
Time-Out TimerYes
Transceiver PasswordYes
Voice Inversion ScramblerYes
Voting FunctionYes
Windows PC Programming and TuningYes
Wired Cloning FunctionYes

FleetSync Signalling Features

External-device SwitchingYes, External devices can be switched (via the AUX output) on receipt of a status ID code
Paging Call FunctionYes
PTT ID Digital ANIYes
Selective CallingYes
Short/Long Text MessagesYes
Status MessagingYes, Status messages are pre-programmed 2-digit codes from 10 - 99 (numbers 80 - 99 are reserved for special messages). Up to 15 messages can be stored in stack memory.

MDC1200 Signalling Features

Emergency Encode/DecodeYes
PTT ID Encode/DecodeYes
Radio check DecodeYes
Stun/Revive DecodeYes

Options

Internal GPS BoardYes - NMEA 0183 V2 compatible
"Molex" interfaceVia KCT-60M Cable
Voice Guide & StorageYes

Applicable Standards

FCCYes, Parts 22/74/90/90.210
IP54Yes
MIL-STD 810 C/D/E/F/GYes

Technical Specifications

Frequency Range - M Type136 - 174 MHz
Number of Channels128
Number of Zones128
Channel Frequency Spread38 MHz
Channel Spacing - Wide/Narrow25 kHz/12.5 kHz
Antenna Impedance - 50 OhmYes
Current DrainStandby: ≤ 0.4 A
Receive: ≤ 1.0 A
Transmit: ≤ 14.0 A
Frequency Stability± 2.5 ppm (-30 °C to + 60 °C)
Operating Temperature Range-30 °C to + 60 °C
Operating Voltage13.6 V DC ± 15%
PLL Channel Steps2.5 kHz/5.0 kHz/6.25 kHz/7.5 kHz
Dimensions160 x 43 x 136 mm (Projections not included)
Weight (net)2.0 Kg

Receiver Specifications

Adjacent Channel SelectivityWide/Narrow: 75/65 dB
Audio Output4 W with less than 5% distortion
IntermodulationWide/Narrow: 70/65 dB
Sensitivity - EIA 12 dB SINADWide/Narrow: 0.28/0.35 µV
Spurious & Image Rejection75 dB

Transmitter Specifications

RF Power Output(High/Mid/Low): 50 W / 25 W / 5 W
FM Noise (EIA)Wide/Narrow: 45/40 dB
Microphone Impedance600 Ohm
Modulation Distortion (Wide/Narrow)Less than 3%/5%
Modulation Limiting± 5.0 kHz at 25 kHz
± 2.5 kHz at 12.5 kHz
Spurious Response (EIA)70 dB