X802-5
X-Series, Class D 5-Channel Power Amplifier
Find your nearest Approved Kenwood Centre
Where to Buy
Key Features
D-class digital power amplifier |
Variable high & low pass filter |
Speaker Level Input |
Signal sensing Turn-on |
2 ohms load capability |
CEA-2006 compliant |
Hi-Res Audio compliant |
One side terminals for smart installation |
Screw-type terminals |
Amplifier Features
Class D Amplifier | Yes |
Full Range Digital Amplifier | Yes |
Load Capability | 2Ω Stable |
Rated power output (4Ω) | 50W x 4 (4Ω) |
Rated Subwoofer power output (4Ω) | 300W x 1 |
Rated power output | 75W x 4 (2Ω) |
Rated Subwoofer power output (2Ω) | 500W x 1 |
Bridged power output (4Ω) | 150W x 2 |
High-Resolution Audio certified | Yes |
CEA-2006 Compliant | Yes |
Low-pass Filter | Yes |
High-pass Fliter | Yes |
Switched Mode Power supply | Yes, with Power MOS-FET |
Signal Sensing Turn-on | Yes |
Speaker level Input | Yes |
Single Side Terminals | Yes |
Die-Cast Aluminium Heat Sink | Yes |
Removable Coverplate | Yes |
Amplifier-Specifications
Rated power output (4Ω, 14,4V) | 50W x 4 (20Hz ~ 20000Hz, 1%THD) |
Rated subwoofer power output (4Ω, 14,4V) | 300 W (20Hz - 200Hz, 1% THD) |
Rated power output (2Ω, 14,4V) | 75W x 4 (1000Hz, 1%THD) |
Rated subwoofer power output (2Ω, 14,4V) | 500W (100Hz, 1% THD) |
Rated power output (CEA-2006) | 50Watts RMS x 4 at 4 ohms and 1% THD |
Rated subwoofer power output (CEA-2006) | 300W |
Low-pass Filter | 50~200Hz (-24dB/oct) |
High-pass Fliter | 50~200Hz (12dB/oct) |
Bass Boost Circuit | 40Hz, 18dB (B-Channel) |
RCA Input Sensitivity | 0.2 ~ 5V |
Speaker Level Input Sensitivity | 4 ~ 12V |
Input Impedance | 10kΩ |
Signal to Noise Ratio | 100dB |
Signal to noise ratio (CEA-2006) | 80dBa (Reference: 1 Watt into 4 Ohms) |
Frequency response (+0dB, -1dB) | 20Hz ~ 50000Hz |
Freq. resp. (+0dB, -3dB) (SUB) | 20Hz ~ 200Hz |
Operating voltage | 14.4V (11V ~ 16V allowable) |
Maximum current consumption | 42A |
Installation Size (WxHxD) | 248 x 53 x 169 (mm) |
Weight | 2.1kg |