Key Features
50 - 1 W RF Output Power (up to 50 W @ 50%, 25 W @ 100% Duty Cycle) |
Light, Compact and Space-Efficient to fit 2 Repeaters in a 1 U Height, 19-inch Rack |
Large 1.71-inch OLED with Icons and Numeric Display |
Thermal-Controlled Cooling Fan |
Dual Digital Protocol: DMR Tier II / NXDN Conventional (programmable one at a time) |
Non-repeat Simplex / Semi-Duplex Mode for Analog and NXDN Digital |
Multi-Site Conventional IP Network up to 16 Sites - for both Digital and Analog (Software option) |
Hot Standby System Redundancy |
SNMP Protocol for Direct Reporting to a Generic System |
IP Remote Control Interface (IPRCI) |
Supplied With
Cable | Yes |
D.C. Cable | Yes |
Foot | Yes, 4 feet |
Front Glass | Yes |
Fuse | Yes |
Hardware Fixture | Yes |
Instruction Manual | Yes, In English, French, Spanish, Italian, German, Dutch, Turkish, Greek & Russsian |
Screw Set | Yes |
Base Station & Repeater Features
16 CTCSS/DCS Repeater Controller Built-In | Yes |
"Base Station" or "Repeater" Mode Operation | Yes |
Flash ROM for Future Upgrades | Yes |
Hang Timer | Yes |
LED Display & Indicators | Yes |
Programmable AUX I/Os | Yes |
RF Power-down Detect | Yes |
Windows Programming and Tuning Software | Yes |
DMR Features
AMBE+2 Vocoder | Yes |
Colour-code Repeater Control | Yes |
IP-Console ID's | 10 |
IP-Voice Logger ID's | Yes |
Conventional IP Network | Yes |
Mixed FM/Digital Operation - Conventional Mode | Yes |
Repeater Control Built-in | Yes |
TDMA 2-slot System Architecture | Yes |
NEXEDGE Base+Repeater Features
GIDs Per Site | 1000 in Conventional Mode |
User List (GID & UID) | 1000 (GID) & 1000 (UID) |
Individual & Group Selcall - Conventional Mode | Yes |
IP-Console ID's | 10 |
Conventional IP Network | up to 16 Sites (needs optional IP License) |
Mixed FM/Digital Operation - Conventional Mode | Yes |
Multiple Encode/Decode Table | 16 RAN's |
Radio Access Control (RAS) | Yes |
Applicable Standards
For use in the EU | Yes |
Measurement - EN Standards | Yes |
Technical Specifications
Frequency Range - E Type | 136-174 MHz |
Number of Channels | 32 |
Channel Frequency Spread | 38 MHz |
Channel Spacing - Analogue - Wide/Wide/Narrow | 25 kHz/20 kHz/12.5 kHz |
Channel Spacing - Digital - Wide/Narrow | 12.5 kHz/6.25 kHz |
Antenna Impedance - 50 Ohm | Yes |
Current Drain | Standby: 0.6 A Transmitting: 12.0 A (Max. power), 9.0 A (25 W) |
Frequency Stability | ± 0.5 ppm (-30 °C to + 60 °C) |
Operating Temperature Range | -30 °C to + 60 °C |
PLL Channel Steps | 6.25 kHz / 5 kHz / 3.125 kHz / 2.5 kHz |
Power Supply | 10.8 - 15.6 V DC |
Dimensions | Projections not included: 208.5 x 44 x 211.5 mm Projections included: 214.5 x 44 x 242.9 mm |
Weight (net) | 1.9 kg |
Receiver Specifications
Audio Output | External Speaker: 4 W with less than 5% distortion at 4 ohms |
Intermodulation | 72 dB |
Selectivity (Analogue) | @ 25 kHz: 80 dB @ 20 kHz: 78 dB @ 12.5 kHz: 74 dB |
Sensitivity | DMR (5% BER): -7 dBµV (0.22 µV) DMR (1% BER): -5 dBµV (0.28 µV) NXDN (3% BER) @ 12.5 kHz: -6 dBµV (0.25 µV) NXDN (3% BER) @ 6.25 kHz: -8 dBµV (0.20 µV) NXDN (1% BER) @ 12.5 kHz: -5 dBµV (0.28 µV) NXDN (1% BER) @ 6.25 kHz: -7 dBµV (0.22 µV) Analog (20 dB SINAD): -3 dBµV (0.35 µV) |
Spurious Response Rejection | 85 dB |
Transmitter Specifications
RF Power Output | 50 - 1 W (50 W @ 50% Duty, 25 W @ 100% Duty) |
Audio Distortion | 1% |
FM Hum & Noise | Analog: @ 25 kHz: 55 dB @ 20 kHz: 53 dB @ 12.5 kHz: 50 dB |
Spurious Emission (EN) | -36 dBm ≤ 1 GHz -30 dBm > 1 GHz |
Spurious Designator | 16K0F3E, 14K0F3E, 14K0F2D, 12K0F2D, 8K50F3E, 7K50F2D,7K60FXD, 7K60F7D, 7K60FXE, 7K60F7E, 7K60FXW, 7K60F7W, 8K30F1E, 8K30F1D, 8K30F7W, 4K00F1E, 4K00F1D, 4K00F7W, 4K00F2D |
Digital Protocol (DMR) | ETSI TS 102 361-1, -2, -3 |
Digital Protocol (NXDN) | ITU-R M2014.3 |
Software Options
DMR Conventional License |
NXDN Conventional License |
Conventional IP Network License |
SIP Phone License for NXDN or DMR |